| T500 Cold-applied PP Fiber Woven Tape |
|
|
 |
For both metallic pipelines and waterproofing works against outdoor bad weathers.
Product description:
Construction:three-layer system
Adhesive layer: Butyl rubber bituminous compound
Backing: PP woven fabric cloth
Interleaf: Anti-adhesive film treated with silicone
The installation is carried out after the liquid adhesive by hand or with a wrapping machine. |
| Product features/benefits: |
| For waterproof: |
For pipes protection: |
|
•Cold applied.
•High resistance to bad weather environment
•Good performance itself to keep dry
•Easily application &installation.
•Suitable for a wide range of temperatures
•Compatible primers
•Safe, clean |
• Cold applied
• Excellent adhesion to pipe
• Flexibility provides extra protection at vulnerable areas
• Excellent conformability and consistent uniform thickness
• Easily applied with no special equipment
• Compatible with common pipe coatings
• Excellent resistance to cathodic disbonding |
|
PP fiber woven tape |
T5100, T5130, T5150, T5165 |
|
Physical Properties |
Test Method |
T5130 Typical Value |
|
English |
Metric |
|
Total thickness |
ASTM D 1000 |
50.0 mil |
1.27 mm |
|
Width |
- |
2’’- 39.5’ |
50 -1000 mm |
|
Length |
- |
33’-200’ |
10 -60 m |
|
Backing colour |
- |
Black,Yellow or orthers |
|
Tensile strength |
ASTM D 1000 |
35 lbs/in |
63 N/cm |
|
Peel Adhesion to primed interface |
ASTM D 1000 |
296 oz/in |
33 N/cm |
|
Cathodic Disbandment |
ASTM G8 |
0.25 in radius 6.4 mm |
|
Dielectric Strength |
ASTM D 149 |
43 Kv |
|
Volume Resistivity |
ASTM D 257 |
2.5x1012 ohm.cm |
|
Water Absorptivity |
ASTM D 570 |
0.05 % |
|
Water Vapor Transmission Rate （24h） |
ASTM F1249 |
0.01g/100sq in/24h |
0.1g/100sq mm/24h |
|
UV resistance |
- |
Excellent |
|
Application Temperature |
- |
23℉-140℉ |
-5 ℃ - 60 ℃ |
|
Max Service Temperature |
- |
-4℉-176℉ |
- 20 ℃ - 80℃ |
| All information contained in this technical data sheet is to be used as a guide and is subject to change without notice. Products can be produced according to given specification. Please contact us for further information and confirmation. | |
|
|
Website location: 