For corrosion protection of Oil, Gas, Petrochemical, Waste Water underground or overhead pipelines and waterproofing.
Product description:
Construction: three-layer system
Adhesive: Butyl rubber bituminous compound and adhesion promoting resins.
Film backing: Special blend of stabilized polyolefines.
Interleaf: Anti-adhesive film treated with silicone.
The installation is carried out after the primer by hand or with a wrapping machine.

• Heavy duty butyl bitumen compound adhesive.
• Excellent adhesion to pipe and itself.
• Flexibility provides extra protection at vulnerable areas.
• Easy to use and no special equipment required
• Compatible with common pipe coatings.
• Excellent resistance to cathodic disbonding.
• Resistant to UV.
• Highly flexible, easy to apply at both low and high temperatures
• Good conformability and consistent uniform thickness.
• Cold applied.

PE bitumen tape

T6100, T6130, T6150, T6165

Physical Properties

Test Method

T6100 Typical Value

English

Metric

Total thickness

ASTM D 1000

40.0 mil

1.00 mm

Width

-

2’’- 39.5’’

50 -1000 mm

Length

-

33’ -200’

10 -60 m

Tensile strength

ASTM D 1000

30 lbs/in

50 N/cm

Peel Adhesion to primed interface

ASTM D 1000

275 oz/in

30 N/cm

Cathodic Disbandment

ASTM G8

0.25 in radius 6.4 mm

Dielectric Strength

ASTM D 149

42 Kv

Volume Resistivity

ASTM D 257

2.5x1012 ohm.cm

Water Absorptivity

ASTM D 570

0.06 %

Water Vapor Transmission Rate （24h）

ASTM F1249

0.01g/100sq in/24h

0.1g/100sq mm/24h

UV resistance

-

Excellent

Application Temperature

-

23℉-140℉

-5 ℃ - 60 ℃

Max Service Temperature

-

-4℉-176℉

- 20 ℃ - 80℃