Pipeline Corrosion Protection
Electronic wire and cable
Power cable splicing and terminating
Who we areWhat we do
News
FAQInstallation helpWarranty info
Oil & Gas/Marine Industrial MachineryEnergy and Utilities AutomotiveTelecommunication Electronic Power plant 
 Website location: Home  > Products > Termination and Splicing > Heat-shrinkable series
 Cold-shrinkable series  Heat-shrinkable series
 
8.7/15KV Heat-shrinkable terminal and splices for crosslinked cable
Technical data:
● This product has two offerings: one-core and three-core. General length of insulation tubing of terminal is 650mm, which can be lengthened to 800mm, 1000mm and 1200mm as required.
●Terminal: The applied process of double ground wires makes the cable margin more reasonable.
●Splices: Three-sealing process, that is to seal both sheath and inner cover and to seal two side of inner insulation tubing, ensures the cable more safe and reliable.
Specification of terminal:
Items Test item Standard requirement Test result Conclusion
15kv outdoor/indoor terminal and splices Power frequency voltage withstand test 45kv/min, no flash, no breakdown 45kv/min, no flash, no breakdown Qualified
Partial discharge test 13kv,≤20pc 13kv, 2pc Qualified
Load circulation test (3 circulations) 5h heated, 3h cooled, the temperature of conductor is 95℃ while heating See below
Partial discharge test 13kv,≤20pc 13kv, 2pc Qualified
Impulse voltage test 105kv,commit 10 times respectively on positive and negative pole,one flash is permitted, but will not be counted to the total test times 105kv, no flash, no breakdown. Qualified
Negative pole direct voltage test 52kv/15min, no flash, no breakdown 52kv/15min, no flash, no breakdown Qualified
4hPower frequency voltage test 35kv/4h, no flash, no breakdown 35kv/4h, no flash, no breakdown Qualified
Specification of splices:
Product name Models Applicable cable section (mm2)
10kv three-core indoor terminal NRSY-10/3.1 25-50
NRSY-10/3.2 70-120
NRSY-10/3.3 150-240
NRSY-10/3.4 300-400
10kv three-core outdoor terminal WRSY-10/3.1 25-50
WRSY-10/3.2 70-120
WRSY-10/3.3 150-240
WRSY-10/3.4 300-400
10kv three-core splices JRSY-10/3.1 25-50
JRSY-10/3.2 70-120
JRSY-10/3.3 150-240
JRSY-10/3.4 300-400
Specification of splices:
Product name Models Applicable cable section (mm2)
10kv three-core indoor terminal for oiled cable NRSZ-10/3.1 25-50
NRSZ-10/3.2 70-120
NRSZ-10/3.3 150-240
NRSZ-10/3.4 300-400
10kv three-core outdoor terminal for oiled cable WRSZ-10/3.1 25-50
WRSZ-10/3.2 70-120
WRSZ10/3.3 150-240
WRSZ-10/3.4 300-400
10kv three-core splices for oiled cable JRSZ-10/3.1 25-50
JRSZ-10/3.2 70-120
JRSZ-10/3.3 150-240
JRSZ-10/3.4 300-400
Dimensions are shown for reference purpose only. Specification subject to change. Products can be produced according to given specification. Please contact us for further information and confirmation.
Previous: 26/35KV Heat-shrinkable terminal and splices for crosslinked cable
Next: 0.6/1KV Heat-shrinkable terminal and splices for power cable
[Back]
Products
  For corrosion protection
  Heat-shrinkable series
  Cold-applied series
  For electronics
Cable terminal and splices
  Cold-shrinkable series
  Heat-shrinkable series
Oil & Gas/Marine
Industrial Machinery
Energy and Utilities
Automotive
Telecommunication
Electronic
Power plant
FAQ
Installation help
Warranty info
Installation video
Product lists
Company profiles
Installation Instruction
E-catalog
Certification
 
 
  Copyright © 2020 Dasheng , Inc. All rights reserved